Snap-On PRO-LINK EDGE Hardware User Manual Download Page 9

Page: 9 / 215

PRO-LINK

Edge Hardware and Software User’s Manual

Chapter

• Using this Manual

Manual Overview

This manual provides basic and detailed information to support you in using the
PRO-LINK

Edge. This manual is composed of the following sections:

•

Table of Contents

—helps you to find the information you are looking for

quickly and easily.

•

Chapter 1: Using this Manual

—provides an overview of this manual.

• Chapter 2:

Hardware and User Interface Overview—provides an over-

view of the

PRO-LINK

Edge hardware, including detailed product

specifications. It also includes an overview of the PRO-LINK

Edge user

interface and navigational features.

•

Chapter 3: Getting Started

—explains the process of connecting the

PRO-LINK

Edge to a vehicle and scanning the vehicle for faults. It also

includes an introduction to the various tabs on the Diagnostic Menu, as
well as information on monitoring battery power.

•

Chapter 4: Using the Diagnostics Menu

—provides detailed instructions

on using the Diagnostics Menu when the

PRO-LINK

Edge is connected

to a vehicle, including its various tabs and features.

• Chapter 5:

Using the Vehicle History Menu

—provides detailed instruc-

tions for using the Vehicle History Menu to manage reports.

•

Chapter 6: Using the Settings Menu

—provides detailed instructions for

using the features of the

PRO-LINK

Edge

Settings Menu.

• Chapter 7:

Using the Applications Menu

—provides an overview of the

Applications Menu. It also provides detailed instructions for registering
applications and for installing updates.

• Chapter 8:

Using the Support Menu

—provides an overview of the Sup-

port Menu, including account information, tutorials, and troubleshooting
information.

•

Chapter 9: Using Record and Playback

—provides information on using

the Record and Playback utilities.

•

Chapter 10: Using PRO-LINK

Repair-Connect

—provides detailed in-

structions for using the features of PRO-LINK

Repair-Connect. A

subscription to Repair-Connect is required.

Each chapter begins with an “at-a-glance” list of the chapter contents, along with
corresponding page numbers.

Summary of Contents for PRO-LINK EDGE
























































































































































































































Search results

Summary of Contents for PRO-LINK EDGE

Reviews:

Brands by name

Popular brands

Snap-On PRO-LINK EDGE, Hardware User Manual

Search results

Summary of Contents for PRO-LINK EDGE

Reviews:

Brands by name

Popular brands