manualshive.com logo in svg

Snap-On PRO-LINK EDGE, Hardware User Manual

Share
Download
Snap-On PRO-LINK EDGE Hardware User Manual Download Page 12

PRO-LINK

® 

Edge Hardware and Software User’s Manual 

5

2

Hardware and 

User Interface 

Overview

Component Checklist, page 6

Product Specifications, page 7

Hardware Overview, page 9

User Interface Overview, page 15

The Main Menu, page 15

Vehicle Scan, page 20

The Vehicle History Menu, page 23

The Settings Menu, page 24

The Applications Menu, page 25

The Support Menu, page 26

Navigational Features, page 27

Screen Icons, page 27

T

his chapter provides an overview of the

 

PRO-LINK

® 

Edge hardware, including 

detailed product specifications. It also includes an overview of the user interface and navi-
gational features.

NOTE:

i

Screen shots used throughout this manual are for illustrative purposes only. All data 
shown is fictitious in nature.

Summary of Contents for PRO-LINK EDGE
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands