manualshive.com logo in svg

Snap-On PRO-LINK EDGE, Hardware User Manual

Share
Download
Snap-On PRO-LINK EDGE Hardware User Manual Download Page 163

162 PRO-LINK

® 

Edge Hardware and Software User’s Manual 

Chapter 

8

 

• Using the Support Menu

Get Support

In the upper-left portion of the screen a Support telephone number is displayed 
(see Figure 8.2).

You can reach Technical Support by calling (800) 311-5452, or you can send an 
e-mail to the following address:

[email protected]

Device Registration and Device Information

The following information is displayed in the Device portion of the screen:

• Device Registration Status (including a 

Register Device

 button if the 

device is not yet registered)

• Name (i.e., the device name)

• Serial Number

• Product ID

• Bundle Version

• Operating System (OS) Version

• Bootloader Version

• Firmware Version

• Registry Version

• Cable  ID

To register your device:

1

Touch the 

Register Device

 button in the Device portion of the screen (see 

(Figure 8.2).

Summary of Contents for PRO-LINK EDGE
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands