1
200/300 Series
— VTC eLock Instructions
200/300 Series
– VTC eLock Instructions
Thank you for purchasing the VTC eLock. The information
contained in these instructions is intended to serve as a
guide so as to allow the eLock to be quickly and easily
put into service. 300 Series eLock can be configured to
work in conjunction with existing 802.11g or Ethernet
networks.
For complete set up and installation instructions for
networked and stand-alone eLocks, please see the
“Help” section in LockView NTC/VTC Software v4.
1. Dot matrix LCD
2. Network button (blue LED)
3. “UP” button
4. “NEXT/SELECT” button
5. “BACK/CANCEL” button
6. “MENU” button
7. “DOWN” button
8. + Button
9. - Button
10. Low battery indicator
(yellow LED)
11. Magstripe reader location
(if equipped)
12. HID Prox or HID iCLASS
reader location (if
equipped)
13. “ENTER” button
14. “CLEAR” button
15. Alpha-numeric keypad
1
2
3
4
5
6
7
8
9
10
15
14
13
12
11
VTC eLock controller
Network
VTC
eLock has three components:
Controller
Motorized gear-driven latch
Control module / battery compartment
Exterior mount
Interior mount
VTC
