background image

BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE

AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY

WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR

CAUSE OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER'S

SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE WARRANTY

LISTED HEREIN IS MADE WITH REGARD TO THIS PRODUCT. ALL WARRANTIES

AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY

ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANU-

FACTURE, PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COM-

PONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH

WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES

BY OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF

ALLTRADE AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND

WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS

AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON.
PURCHASER'S SOLE AND EXCLUSIVE REMEDY IS AS STATED ON PRECEDING PAGES.

LIMITATIONS OF LIABILITY

IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR

INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY

KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH

OR PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS REPRE-

SENTATIVE(S) AND PURCHASER, AND WARRANTY HEREUNDER, AND/OR THE

EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF

ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS REPRESENTA-

TIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO

EVENT, WHETHER BECAUSE OF A BREACH OF CONTRACT, WARRANTY, TORT

(INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALLTRADE'S AND/OR ITS

REPRESENTATIVE (S) LIABILITY EXCEED THE PRICE OF THE PRODUCT. All LIA-

BILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON

THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE.

LIMITATIONS ON WARRANTY DISCLAIMERS

Some states do not allow limitations on how long an implied warranty lasts and

some states do not allow the exclusion or limitation of the incidental or consequen-

tial damages, so part or all of the above limitations or exclusions may not apply to

you. This warranty gives you specific legal rights, and you may also have other

rights, which vary from state to state.
If your product is not covered by this warranty, please call our Customer Service

Department at 1-888-278-8092 for general repair information, and charges and the

location of your nearest authorized service facility.

ject to warranty. Alltrade retains the sole discretion to determine whether any item

or part is nonconforming and, if so, whether the item and/or part will be repaired

and/or replaced. If the unit is repaired, new or reconditioned replacement parts may

be used. If Alltrade chooses to replace the product, it may replace it with a new or

reconditioned of the same or comparable design. The repaired or replaced unit will

be warranted under the terms of the remainder of the one year warranty period; cov-

ered defective parts not subject to normal wear and tear or other exclusions will be

repaired or replaced, at Alltrade's option. During the warranty period, Alltrade will

be responsible for the return shipping charges. Alltrade's repair and/or replacement

of any nonconforming item and/or part thereof shall constitute fulfillment of all obli-

gations to the purchaser. Alltrade shall not be responsible or liable for any expense,

including freight charges, or repairs made outside Alltrade's facility or an Alltrade

designated service, unless expressly agreed to by Alltrade in writing. Under no cir-

cumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or

rental, inconvenience, commercial loss, or consequential damages.
For the location of an Authorized Service Center nearest you, please call customer

service at 1-888-278-8092.
This warranty does not cover parts damaged due to normal wear, abnormal condi-

tions, misapplication, misuse, abuse, accidents, operation, improper storage, or

freight damage. Parts damaged or worn by operation in dusty environments are not

warranted. Failure to follow recommended operating and maintenance procedures

also voids warranty.
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,

NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS

OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, USE

OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, OR OTHER

CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE

NOT COVERED BY THIS WARRANTY.
Alltrade will not be liable for the following: labor charges, loss or damage resulting

from improper operation, maintenance or repairs made by other persons; pre-deliv-

ery services such as assembly, oil and lubricants, and adjustment; maintenance

services that are normally required to maintain the product.
The use of other than genuine Snap-On™ Repair Parts will VOID the warranty.

WARRANTY DISCLAIMERS

EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUAR-

ANTIES AND/OR REPRESENTATIONS, EXCEPT FOR THE LIMITED WARRANTY

PROVIDED HEREIN, ALL OTHER EXPRESS WARRANTIES, GUARANTIES, AND/OR

REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE(S) REGARDING

THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE

PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF

WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,

WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY

ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE

25

26

Summary of Contents for 1800 PSI ELECTRIC PRESSURE WASHER






























Reviews: