SMS ControlMate, User Manual, Page: 31 / 56

SMS ControlMate/3G © 2016-2018 info@SL4P.net Page 31 of 56
WHO HAS ACCESS TO MY CONTROLLER?
We mention the CLI access list – which allows users to perform actions in ControlMate.
Generally speaking, anyone in the access li st can do anything as an ‘administrator’, but members
could be tagged as a ‘user’ and restricted to using SHOW and OUT commands.
Typing the command SHO CLI (or SHO SMS ) will receive a reply like this –
# -Number-
0* 0412345665
1* 0423456775
9S 0397683340
>
From the top to bottom
– left to right…
0… 1 The left-most digit is the position in the access list. In this case, only users 0 and 1 have
been set up.
* This character indicates the user has full ‘administrator’ permissions.
S indicates the number is a ‘ slave’ ControlMate to receive output messages.
No marker indicates limited OUT/SHO access.
9..9 is the Caller ID presented by the user’s phone. This may be a landline phone (for dial -in
control), or an SMS enabled mobile for command & message access.
Because
SMS messages are limited in length , there may be additional CLI records further down the
list. To see more detail for a specific CLI entry, type SHO CLI n
>sho cli 0
CLI #0
* 0402345665
MC mobile
INSMS _ _ _ _
OUTSMS _ _ _ _
INZsms _ _ _ _
OUTZsms _ _ _ _
Out ACL 0 1 2 3
DialInDo [OUT 0 TOG]
>
If you only want provide users with limited access to some outputs
– e.g. the doors but not the pump…
You can set values in the ACL list with -
SET ACL 2 0123 will give CLI user 2 ( as above ) control of all four outputs (0123)
SET ACL 1 2 will allow CLI user 1 to control of output (2)
SHO ACL displays the current permissions for all users
To display the INSMS and OUTSMS assignments for all CLI members.
This is the most commonly used SMS notifications
Type
SHO SMS
# In / Out
0:* _ _ _ _ / _ _ _ _
1:* _ _ _ _ / _ _ _ _
>