SMS ControlMate, User Manual, Page: 13 / 56

SMS ControlMate/3G © 2016-2018 info@SL4P.net Page 13 of 56
SET INCO unter input Value
(-32000 to
+32000) Set value n for input counter.
(Increments for each ‘on’
event)
Negative values will stop at
zero
SET OUTCO unter output Value
(-32000 to
+32000) Set value n for output counter.
(Increments for each ‘on’
event)
Negative values will stop at
zero
SET OUTPUT VARIABLES
SET OUTON text output text Set the text notification to be
associated with each output
ON state
SET OUTOF text
output text
Set the text notification to be
associated with each output
OFF state
SET PUL se output duration 13 Set the pulse ‘on’ duration for
each relay.
SET FLA sh output duration Set the flashing rate for each
relay.
SET SYSTEM VARIABLES
SET SITE NAME name A unique identifier for this
ControlMate Displayed in
SHO SYS and SMS
messages
SET
CALL back
on|off Default is ON Enable or disable the dial-in
callback feature.
SET ALIAS
replaceString
(one word) withString
(up to 24 chars)
Define replacement strings.
e.g. pump translates to out 1
SET TIME r
timer hh:mm {daysNoSpaces} {command}
Set a recurring timer event
SET SAV emode
LAST known
on|off Determines whether the
ControlMate will restart with
the last-known output states,
or use pre-set states for each
relay.
SET ONST ate output on|off When SAVemode is turned
OFF , we can individually set
the next power-on state for
each output relay
SET LCD 0|1|2|aut|+ LCD status/in/out/auto/incrmt
SET BUT ton button {command}
blank = remove When the optional LCD panel
is installed, a single command
may be assigned to each
button.
CLEAR SETTINGS
This parameter
ALWAYS
lower -case!
SET CLEAR all Clears all configuration
settings
SET
CLEAR cli
Clears the caller/user access
list
SET CLEAR but
Clear the optional LCD-button
command assignments
SET CLEAR sms Clears the SMS notification
list
SET CLEAR in Clear all INPUT settings