© SMP (PLAYGROUNDS) LTD, TEN ACRE LANE, THORPE, EGHAM, SURREY, TW20 8RJ
ZINGO X-012
Page 23
18) Position Deck (item 20) onto Deck frame as shown and secure using 7 off M10 x 40 Resistorx bolts (item 49)
and M10 Washer (item 60) in positions shown. See FIG.19 & 20.
NOTE: See “Appendix A Note 1” for assembly of Plastic Slide Entry Frame and deck.
NOTE:
Ensure that the cutout in the deck for the mounting of the slide is positioned at the correct orientation.
19) Attach in 4 places 1 off Slide Entry Frame (item 8) to the Clamp Rings that are 800mm above the Deck fixings
and the lower 600mm centers Clamp Rings. Each end of the Slide Entry Frame rails is held between a Bar
Socket Top (item 46) and a Bar Socket Bottom (item 45) using 2 off BHCS Fixings (item 75) and should be
fixed with the plastic panel fixing inserts and slide mountings on the outside of the structure. See FIG.21, 22 &
FIG.C.
i)
For assembly method see Note 4.4, 3), i) to v).
ii)
Attach Slide Entry Frame through Deck into Deck Frame using 2 off M10 x 40 Resistorx bolts (item 49)
and M10 washers (item 60).
FIG.20
FIG.19
49
60
20
49
60
FIG.21
FIG.22
8
49
60
ISSUE B
Summary of Contents for ZINGO MAGIA X-012/P
Page 2: ...INTENTIONALLY LEFT BLANK ...
