Smoke hollow 1900677, Manual

Page: 9 / 60

9
Assembly
3
4
Step 3:
Attach the cart rear panel
to the firebox left lower
panel and firebox right
lower panel using (4)
M6x15
screws.
(Fig.3)
Step 4:
Attach the cart front panel to the left front leg and right front leg using (4)
M6x15
screws.
(Fig.4)
7
Assembly
Note:
Carefully cut the tape holding the carton together. Cut the carton so that it can lay flat on
the ground to provide a clean surface for assembling your Grill. Remove the packing materials
and all the parts from inside the Cabinet. After unpacking all the parts, check to make sure you
HAVE all the parts. If anything is damaged or missing, contact our toll free number: 866-475-
5180. Discard all packing material in a safe and recyclable manner. Save this Assembly Manual
for future reference.
Tools Required: Phillips Head Screwdriver, Adjustable Wrench or Pliers
Step 3
Step 2
:
Assemble Firebox Left/Right
Lower Panel
Locate
: Firebox Left Lower Panel, Firebox
Right Lower Panel and (4) M6x15 bolts
Procedure:
Refer to Fig. 2, attach the Firebox Left Lower
Panel to the Left Rear Leg #3 and Left Front
Leg #4 using (2) M6x15 bolts; Attach the Fire-
box Right Lower Panel to the Right Rear Leg
#1 and Right Front Leg #2 using (2) M6x15
bolts.
Step 2
Step 1
Step 1: Assemble four Legs to Cart Bot-
tom Panel
Locate : (4) Legs, Bottom Panel and (4) M6x15
bolts. Note- each leg will have an identification
label on it.
Procedure
:
Refer to Fig. 1, attach (4) Legs to Cart Bottom
Panel using (4) M6x15 bolts.
Step 3
:
Attach Cart Rear Frame
Locate
: Cart Rear Frame and (4) M6x15 bolts
Procedure : Refer to Fig. 3, attach the Cart
Rear Frame to the Firebox Left Lower Panel
and Firebox Right Lower Panel using (4)
M6x15 bolts.
Fig. 3
Fig. 2
Fig. 1
Leg #2
Leg #1
Leg #4
Leg #3
Leg #2
Leg #1
Leg #4
Leg #3
Cart Rear Panel
8
Assembly
Step 4
Step 5
Step 6
Fig. 5
Step 5
:
Assemble Wheels
Locate
: Wheel Axle, (2) Bushings for Axle, (2)
M8 Nuts for Axle, (2) Wheels, (2) Wheel Caps
(2) Φ8 Washers
Procedure:
Refer to Fig. 5, insert the Wheel
Axle through the Left Rear Leg #3 and Left
Front Leg #4. Then attach (2) Axel Bushings
and (2) Wheels to the Axle end. Fix the Axle by
(2) Φ8 washers and (2) M8 nuts.
Note: Need
two people to attach (2) washers and (2)
nuts synchronously.
Lastly cover the Wheels
by the Wheel Caps as shown.
Step 4
:
Assemble Cart Front Frame
Locate
: Cart Front Frame and (4) M6x15 bolts
Procedure
: Refer to Fig. 4, attach the Cart
Front Frame to the Left Front Leg #4 and
Right Front Leg #2 using (4) M6x15 bolts.
Fig. 4
Fig. 6
Step 6
:
Assemble Dampers
Locate
: (2) Damper, (4) M5x8 shoulder bolts
Procedure:
Refer to Fig. 6, attach (2)
Damper to the both sides of Cart Front
Frame using (4) M5x8 shoulder bolts.
Leg #2
Leg #4
Cart Front Panel
Fig. 4
Fig. 3
Left Front Leg
Right Front Leg
5
Step 5:
Insert the wheel axle through the left rear and left front leg.
Then attach one wheel to each end of the axle. Use (2) M10 lock
nuts to secure the wheels to the axle
(Fig.5).
Next screw casters
into the bottom of right rear and right front legs
(Fig.5b)
.
Fig. 5
Wheel
Nut
Axle
Fig. 5b
Caster