Smoke hollow 1900677, Manual

Page: 11 / 60

11
Assembly
9
10
Assembly
Step 9
Fig. 11
Step 9: Assemble Lid Handle and Lid
Handle Stand-offs
Locate
: Lid Handle and (2) Lid Handle
Stand-offs
Procedure
: Refer to Fig. 9, attach (2) Lid
Handle Stand-offs to the Lid Handle.
Step 11: Assemble Heat Indicator
Locate
: Heat Indicator
Procedure
: Unscrew the nut from the Heat
Indicator, then place the Heat Indicator
into the area in the center of the Lid and
fasten in place with the nut as shown in
Fig.11.
Fig. 9
Step 11
Step 10
Step 10: Assemble Lid Handle Set
Locate
: Lid Handle Set, (4) M6x15 bolts
Procedure
: Refer to the Fig. 10, attach the
Lid Handle Set to the Lid using (4) M6x15
bolts.
Fig. 10
Step 9:
Attach lid handle stand-offs to the
lid Handle. Then attach to lid using
(4) M6x15 screws.
(Fig.9)
Step 10:
Unscrew the wingnut from the temp gauge,
then place the temp gauge into the area in the
center of the lid and fasten in place with
the wingnut as shown.
(Fig.10)
Step 11:
Insert smoke stacks through the lid
from the inside. Align (3) holes in
the smoke stacks with the holes in
the lid first. Then attach the smoke
stacks to the lid with (6) M6x15
screws inserted through the lid from
the outside. Fasten the smoke stacks
to the lid with (6) KEPS nuts securely
from inside the lid.
(Fig.11)
Lid
Lid Handle
Stand-offs
Lid Handle
10
Assembly
Step 9
Fig. 11
Step 9: A ssemble Lid Handle and Lid
Handle Stand-offs
Locate
: Lid Handle and (2) Lid Handle
Stand-o ffs
Procedure
: Re fer to F ig. 9 , att ach (2 ) Lid
Handle St and-offs to the Lid Handle .
Step 11: Assemble Heat Indicator
Locate
: Hea t Indi cat or
Procedure
: Unscrew the nut from the Heat
Indicator, then place th e Heat Indic ator
into the area in the cent er of the Lid and
fasten in plac e with the nut as sho wn in
Fig.11.
Fig. 9
Step 11
Step 10
Step 10: Assemble Lid Handle Set
Locate
: Lid Handle Set, (4) M6x15 bo lts
Procedure
: Re fer to t he F ig. 10 , att ach the
Lid Handle Set to the Lid using (4) M6x15
bolts.
Fig. 10
Lid
Temperature
Gauge
11
Assembly
Step 13: Assemble Smoke Stack
Caps
Locate : (2) Smoke Stack Caps
Procedure : Refer to Fig. 13, screw
clockwise the Smoke Stack Caps into
the Smoke Stacks.
The smoke stack
cap is adjustable to allow more (anti-
clockwise) or less (clockwise) smoke
to exit the grill.
Note: Always
wear protective gloves
or mitts when turn the smoke stack
caps while in use.
Fig. 13
Step 14
Step 13
Step 14: Assemble Side Shelves
Locate : (2) Side Shelves and (8) M6x52
bolts
Procedure : Refer to Fig. 14, attach (2)
Side Shelves to the each Legs using (8)
M6x52 bolts.
Fig. 14
Step 12
Fig. 12
Step 12: Assemble Smoke Stacks
Locate : (2) Smoke Stacks, (6) M6x15
bolts and (6) M6 KEPS nuts
Procedure : Refer to Fig. 12, insert (2)
Smoke Stacks through the Lid from the
inside. Align (3) holes in the Smoke
Stacks with the holes in the Lid first. Then
attach the Smoke Stacks to the Lid with
(6) M6x15 bolts inserted through the Lid
from the outside. Fasten the Smoke
Stacks to the Lid with (6) KEPS nuts se-
curely inside the Lid as shown in Fig.12.
Fig. 9
Fig. 10
Fig. 11
Smoke Stacks
Lid
10
11