Smoke hollow 1900677, Manual

Page: 10 / 60

10
Assembly
6
7
8
8
Assembly
Step 4
Step 5
Step 6
Fig. 5
Step 5
:
Assemble Wheels
Locate
: Wheel Axle, (2) Bushings for Axle, (2)
M8 Nuts for Axle, (2) Wheels, (2) Wheel Caps
(2) Φ8 Washers
Procedure:
Refer to Fig. 5, insert the Wheel
Axle through the Left Rear Leg #3 and Left
Front Leg #4. Then attach (2) Axel Bushings
and (2) Wheels to the Axle end. Fix the Axle by
(2) Φ8 washers and (2) M8 nuts.
Note: Need
two people to attach (2) washers and (2)
nuts synchronously.
Lastly cover the Wheels
by the Wheel Caps as shown.
Step 4
:
Assemble Cart Front Frame
Locate
: Cart Front Frame and (4) M6x15 bolts
Procedure
: Refer to Fig. 4, attach the Cart
Front Frame to the Left Front Leg #4 and
Right Front Leg #2 using (4) M6x15 bolts.
Fig. 4
Fig. 6
Step 6
:
Assemble Dampers
Locate
: (2) Damper, (4) M5x8 shoulder bolts
Procedure:
Refer to Fig. 6, attach (2)
Damper to the both sides of Cart Front
Frame using (4) M5x8 shoulder bolts.
Leg #2
Leg #4
9
Assembly
Step 7
Fig. 7
Step 8: Attach the Lid and Firebox
Assembly to the Cart Assembly
Locate
: Lid and Firebox Assembly, Cart As-
sembly and (6) M6x15 bolts
WARNING: This step requires two peo-
ple at least to lift the Lid and Firebox
Assembly. Failure to do so may result in
personal injury or damage to the grill.
Procedure:
Refer to Fig. 8, place the Lid
and Firebox Assembly on top of the Cart
Assembly. Attach the Firebox to the Cart
Assembly using (6) M6x15 bolts.
Step 7
:
Assemble Charcoal Door
Hinges
Locate
: (2) Charcoal Door Hinges and (8)
M5x10 Flat bolts
Procedure:
Refer to Fig. 7, attach (2) Char-
coal Door Hinge to the both sides of Cart
Front Frame using (8) M5x10 Flat bolts.
Step 8
Fig. 8
Step 6:
Attach (2) dampers to both sides of cart front panel using (4)
M5x8
shoulder screws.
(Fig.6)
Step 7:
Attach (2) charcoal door hinges to each side of cart front panel using (8)
M5x10
screws.
(Fig.7)
Step 8:
With the assistance of a
friend to help avoid an
injury, place the lid and
firebox assembly on top of
the cart assembly. Attach
the firebox to the cart
assembly using (14)
M6x15
screws.
(Fig.8)
You will
need to open the lid to be
able to view and access the
screw locations.
Cart Front Panel
Cart Front Panel
Firebox Assembly
Cart Assembly
Door Hinge
Door Hinge
Damper
Damper
Fig. 8
Fig. 7
Fig. 6