Smoke hollow 1900677, Manual

Page: 14 / 60

14
16
Assembly
17
18
13
Assembly
Step 17: Assemble Charcoal Tray
Ad-
justable H
andle Ass
embly and
Knob
Locate
: Charcoal Tray Adjustable Ha
ndle
Assembly, Charcoal Tray Adjustable Knob,
(1) R Pin and (1) M6x21
shoulder bo
lt
Procedure
: Refer to Fig. 17A, insert
the bar
of the Charcoal Tray Adjustable Han
dle As-
sembly thro
ugh the Gear Panel.
Refer to Fig. 17B, insert
the bar of th
e Char-
coal Tray Adjustable System through the
hole in the
Handle Assembly.
Refer to Fig. 17C, insert
(1) R pin through
the hole in t
he bar of th
e Charcoal
Tray Ad-
justable System.
Refer to Fig. 17D, attach the bar of t
he
Charcoal Tray Adjustable Handle Assembly
to the Left Rear Leg #3 using (1) M6x21
shoulder bolt.
Refer to Fig. 17E, screw clockwise th
e Char-
coal Tray Adjustable Kn
ob onto the
Bar of
Charcoal Tray Adjustable Rod Assembly.
Step 17
Fig. 17A
Fig. 17B
Fig. 17C
Fig. 17E
Fig. 17D
13
Assembly
Step 17: Assemble Charcoal Tray
Ad-
justable H
andle Ass
embly and
Knob
Locate
: Charcoal Tray Adjustable Ha
ndle
Assembly, Charcoal Tray Adjustable Knob,
(1) R Pin and (1) M6x21
shoulder bo
lt
Procedure
: Refer to Fig. 17A, insert
the bar
of the Charcoal Tray Adjustable Han
dle As-
sembly thro
ugh the Gear Panel.
Refer to Fig. 17B, insert
the bar of th
e Char-
coal Tray Adjustable System through the
hole in the
Handle Assembly.
Refer to Fig. 17C, insert
(1) R pin through
the hole in t
he bar of th
e Charcoal
Tray Ad-
justable System.
Refer to Fig. 17D, attach the bar of t
he
Charcoal Tray Adjustable Handle Assembly
to the Left Rear Leg #3 using (1) M6x21
shoulder bolt.
Refer to Fig. 17E, screw clockwise th
e Char-
coal Tray Adjustable Kn
ob onto the
Bar of
Charcoal Tray Adjustable Rod Assembly.
Step 17
Fig. 17A
Fig. 17B
Fig. 17C
Fig. 17E
Fig. 17D
Attach the bar of the charcoal traylinkage
assembly to the left rear Leg #3 using (1)
M6x21 shoulder screw
(Fig. 16D)
Screw the charcoal tray lift knob clockwise
onto the charcoal tray linkage rod.
(Fig. 16E)
Fig. 16D
Fig. 16E
Charcoal Tray
Linkage Assembly
Charcoal Tray
Lift Knob
Charcoal Tray
Linkage Rod
Step 17:
Attach the charcoal
tray to the charcoal
tray lift assembly using
(4) M6x15 screws
(Fig. 17)
Step 18:
With assistance from a
friend to avoid injury or
damage to grill, attach
the charcoal door
assembly to the charcoal
door hinges using door
hinge pins and tighten
nut.
(Fig. 18)
14
Assembly
Step 18: Assemble Charcoal Tray
Locate
: Charcoal Tray and (4) M6x15 b
olts
Procedure:
Refer to Fig. 18, attach the Charcoal
Tray to the Adjustable
System using (4) M6x15
bolts.
Step 19
Step 20: Assemble Charcoal Door Han-
dles and Locking Br
ackets
Locate
: (2) Charcoal Door Handles, (2) Char-
coal Door Handle Wash
ers, (2) Charcoal Door
Locking Brackets, (2)
Φ
10 spring washers and
(2) M10 nuts
Procedure:
Attach (2) Charcoal Door
Handles
and (2) Charcoal
Door Locking Brackets
to the
Charcoal Door using (2) Charcoal Door Handle
washers, (2)
Φ
10 spring washers and (2) M10
nuts as shown in Fig. 20.
Note: Do not over tighte
n the nuts to the end,
make sure the Handles
can be turned properly.
Step 18
Step 20
Step 19: Assemble Charcoal Door to the
Grill
WARNING: This
step
requires
two
people
to
handle it. Failure to do so m
ay result in
personal injury or damage to the grill.
Locate
: Charcoal Door, (2) R pins a
nd (2) shafts
for Charcoal Door
Procedure:
Attach the Charcoal Door
Assembly
to the Charcoal Door Hinges
using (2) shafts
and (2) R pins as shown
as Fig. 19.
Fig. 18
Fig. 19
Fig. 20
Fig. 17
Charcoal Tray
Charcoal Door
Assembly
Door Hinge
Pins (E)
Nut (B)
Fig. 18
Nut (B)