13
Assembly
Fig. 14
Step 14: Attach the Warming Rack on
the Gas Grill Side
Locate
: Warming Rack, (2) M6x30 Bolts
Procedure
:
Refer to Fig. 14 and attach the back of the
Warming Rack to the Lid with (2) M6x30
bolts as shown. Insert the Front Wire Legs
into the holes on each side of the Grill.
Open and close the Lid to be certain the
Warming Rack moves smoothly.
Fig. 13A
Step 13: Assembling the Gas Grill Lid
Locate
: The Gas Grill Lid ( it has louvers
at the back), (1) Heat Indicator, (1) Lid
Handle, (2) M6x15 bolts, (2) Hinge Pins,
(2) “R” Clips
Procedure
:
Refer to Fig. 13A and unscrew the nut
from the Heat Indicator stem. Insert the
Heat Indicator through the hole in the front
center of the Lid with the Dial Face
outside. Secure it to the Lid with the nut
you removed – check to see the dial face
is correctly aligned , then tighten the nut
with wrench. Refer to Fig.13B and attach
the Lid handle to the Lid with (2) M6x15
bolts as shown. Refer to Fig.13C and
place the Lid on the Gas Grill side of the
Grill. Attach the Hinges together using the
(2) Hinge Pins and insert an “R” Clip into
the ends of the Pins to keep them from
coming loose.
Step 13
Gas Grill lid
Fig. 13B
Fig. 13C
Warming rack
Step 14
