14
Step 15: Assemble Smoke Stack and
Charcoal Grill Lid
Locate
: Smoke Stack Assembly, Smoke
Stack Lid, (6) M6x15 bolts, (4) M6 KEPS nuts,
(1) small spring, (1) M6 Cap nut, (1) Heat
Indicator, (1) Lid handle, (2) Hinge Pins , (2)
“R” Clips
Procedure
:
Refer to Fig. 15A and 15B Insert the Smoke
Stack Assembly from INSIDE the Lid and
fasten it to the Lid with (4) M6x15 bolts and
KEPS nuts. NOTE: the bolts are inserted from
the OUTSIDE of the Lid. Refer to Fig. 15C
and Place the Smoke Stack Lid onto the
threaded stud , add the small spring and then
fasten with the Cap nut tight enough that the
Lid can be rotated to open and close the
Smoke Stack. Refer to Fig 15D and unscrew
the nut from the stem of the Heat Indicator
and follow the same procedure as before to
install it to the Charcoal Grill Lid. Refer to Fig.
15E and attach the Lid Handle to the Lid with
(2) M6x15 bolts. Refer to Fig. 15F and attach
the Lid to the Charcoal Grill Side, following
the same procedure as before on the Gas
side.
Note: The lid with smoke stack must be
attached to the charcoal grill side.
Assembly
Step 15
Fig. 15A
Fig. 15D
Fig. 15E
Fig. 15B
Fig. 15C
Fig. 15F
