11
Step 9: Assemble the Side Burner Gas
Burner Unit
Locate
: (1) Side Burner Housing, Hose, Valve
and Regulator assembly (HVR), Igniter, igniter
wire, Burner Assembly, Side Burner Wire Grid
rack
,
and (5) M4x8 Bolts, and (1) M4 Nut
Procedure
:
Position the gas valve BEHIND the front panel
of the Housing and align the (2) threaded holes
in the gas valve with the (2) holes in the Side
Burner Housing Front Panel. Attach the gas
valve to the panel using the (2) M4x8 screws.
Refer to Fig. 9B, and insert the Igniter from the
UNDERSIDE of the Housing and tightly fasten
in place with (1) M4x8 bolt and M4 nut. Refer to
Fig. 9C and attach the Igniter Wire into the Gas
Valve connection opening. Refer to Fig. 9D –
insert the Side Burner Assembly, by passing
the Tube portion DOWN from the TOP side of
the Housing and position the tube end securely
and COMPLETELY over the Gas Valve tip,
making sure that the valve is completely
INSIDE the tube. Refer to Fig. 9D Fasten the
Burner Assembly to the Housing with (2) M4x8
bolts from the UNDERSIDE of the housing.
Refer to Fig. 9E and position the Side Burner
Wire Grid Rack in place, over the burner, and
into the (3) holes.
Assembly
Step 9
Fig.9A
Fig.9B
Fig.9C
Fig.9D
Fig.9E
