Figure 6.7 Oil the buttons (circled) along the cross-feed table and cross slide.
2.
Put a few drops of oil on the compound and cross-slide feedscrews.
3.
Put a few drops of oil on the compound slides.
Oiling the Tailstock
1.
Oil the buttons on top of the tailstock (Figure 6.8)
Figure 6.8 Oil the two buttons on the top of the tailstock.
Oiling the Apron
1.
Put oil in the button just behind the cross-slide handwheel (Figure 6.7).
2.
Put oil in the button at the back of the cross-slide (Figure 6.7).
6-6
Or Visit www.smithy.com
Uncrating and Setting Up the MI-1220 XL
Summary of Contents for Midas 1220 XL
Page 6: ......
