5
HOW TO REMOVE/INSERT BLADES
1. Disconnect knife from electrical outlet.
2. Separate blades and wash before using and/or storing.
3. Attach the two blades before inserting in (power unit) handle. Grip both blades below the grease
guards (Fig. 1). Slip rivet at top of one blade into keyhole slot of other blade (Fig. 2). Bring the two
blades together making sure tips remain locked.
4. Grip blades away from cutting edge, position cutting edge in same direction as the switch bar.
Insert grease guard end into handle until blades click into place (Fig. 3).
5. To remove blades from handle, grip blades away from cutting edge, push in blade release buttons
on either side of knife handle, and pull to remove blades (Fig. 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
