Smithco Spray Star 1000, Parts & Service

Page: 89 / 112

89
Accessories
1010D (MANUAL) HOSE REEL PLUMBING DRAWING
REF# PART# DESCRIPTION QUANTITY
1 15-776 Tee 1
2 15-740 50 Series Clamp 3
3 15-738 Ball Valve 1
4 15-749 Hose Barb 1
INSTALLATION INSTRUCTIONS
1. Disconnect the ball valve from the bottom of the filter assembly. Install tee fitting (15-776) between the
ball valve and the elbow. Use the clamp that was removed and one of the new ones provided. Only
tighten clamps enough so it can be rotated.
2. Install hose barb (15-749) onto the ball valve (15-738) using a 50 series clamp (15-740) Tighten clamp.
Install the ball valve/hose barb to the tee (15-776) that was installed in step 1 using a 50 series clamp
(15-740).
3. Rotate the tee fitting so the valve points toward the outside of the machine. Tighten all clamps.
4. Route the 3/4" Black hose from the hose barb you installed in step 2 to the hose barb on the hose reel.
Secure with 18-040 Hose clamps.
5. When installing the hose reel with a manual spray system you will have parts left over that you will not
need.