smith&nephew TRIGEN SURESHOT, User Manual

Page: 30 / 40

28
Guidance and manufacturer’s declaration –
Electromagnetic emissions, immunity and separation distances
Changes or modifications to this system not expressly approved by the manufacturer may result in
increased emissions or decreased immunity performance of the equipment or system and could
cause EMC issues with this or other equipment. This system is designed and tested to comply with
applicable regulations regarding EMC and shall be installed and put into service according to the
EMC information stated as follows.
Note Use of portable phones or other radio frequency (RF) emitting equipment near the system may
cause unexpected or adverse operation.
Note The presence of certain metal objects within the electomagentic tracking volume system may
cause unexpected or adverse operation.
Note The equipment or system shall not be used adjacent to, or stacked with, other equipment.
If adjacent or stacked use is necessary, the equipment or system shall be tested to verify normal
operation in the configuration in which it is being used.
Note The use of accessories, transducers and cables other than those specified may result in
increased emissions or decreased immunity performance of the equipment or system.
Compliant cables and accessories
The table below lists cables, transducers, and other applicable accessories for which the
manufacturer claims EMC compliance.
Note Any supplied accessories that do not affect EMC compliance are not listed.
Part No. Type Description
7169-1152 Sensor Humeral Drill Guide Probe
7169-2801 Field Generator TRIGEN™ SURESHOT™ Targeter
7169-2814 Sensor META-NAIL™ Standard Drill Guide Probe
7169-2815 Sensor Percutaneous TAN™/FAN Drill Guide Probe
7169-2803 Sensor META-NAIL Semi-extended Drill
Guide Probe