SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
SMITH Manufacturing 1-954-941-9744 www.SmithMfg.com
VERSION 11/2016
FS351SP
Propane
3
• Always wear protective equipment, including
ear protection and goggles.
• Never wear baggy or loose fitting clothing that
can be caught on controls or moving parts.
• The surface preparator can emit flying
particles and debris during operation. Never
operate the machine near bystanders, animals
or children.
• Check fluid levels and get acquainted with the
controls.
• Do not operate the machine in an explosive
atmosphere, near combustible materials, or
when gas fumes may not be properly dispersed.
• Never leave the machine unattended when
running, and you must hold onto the handle with
two hands when the cutter drum is engaged.
• Ensure that all guards are in place before the
machine is operated, since rotating and moving
parts will cause injury upon contact.
•
always make sure that main
fuel valve is turned oFF when
storing machine.
Incorrect use of the surface planer can
result in property damage, personal injury,
or death. Be sure to read and follow all
directions and precautions as outlined in
this manual.
SaFety gUIDelIneS
DUST RESULTING FROM USE OF THIS MACHINE AND CUTTER
TOOLS MAY INCLUDE CHEMICALS PROVEN TO CAUSE CANCER,
BIRTH DEFECTS, AND REPRODUCTIVE CONTRAINDICATIONS,
INCLUDING LEAD FROM SOME PAINTS AND SILICA FROM
CONCRETE AND MASONRY. ALWAYS OPERATE THIS MACHINE
IN A WELL-VENTILATED AREA WITH A HEPA FILTER DUST
CONTAINMENT VACUUM SYSTEM. OPERATORS SHOULD ALWAYS
WEAR PROPER SAFETY EQUIPMENT, INCLUDING AN APPROVED
RESPIRATOR TO FILTER OUT FINE DUST PARTICLES. ALL EPA
AND OSHA GUIDELINES REGARDING AIRBORNE DUST SHOULD
BE FOLLOWED WHEN OPERATING THIS MACHINE. FAILURE TO
FOLLOW THESE SAFETY PROTOCOLS MAY RESULT IN SERIOUS
INJURY, ILLNESS, OR DEATH
