manualshive.com logo in svg

Smith-Root ELECTROFISHING BOATS, User Manual, Page: 16 / 53

Share
Download
Smith-Root ELECTROFISHING BOATS User Manual Download Page 16

14

2007

ELECTROfISHING

BOATS

Aux. Fuel Tank 

Shut Off

Port Tank 

Shut Off

Starboard Tank 

Shut Off

Water Seperator

Viewing Chamber

Fuel Filter

Water Seperator

To Generator

To Outboard Motor

Smith-Root boats come with a water separator fuel filter and 

generator fuel pump. 

Always use outboard manufacturer's recommended fuel. 

MAINTENANCE

Check fuel  filter viewing chamber for signs of water daily. 

Refer to your OEM Manual.

TO RE-PRIME YOUR OUTBOARD fUEL 

SYSTEM

First plug the auxiliary fuel hose to the auxiliary fuel tank 

(the tank that comes with the outboard motor). Then open 

the port tank shut off valve and pump the priming bulb 18 

or 20 times. Then close the port tank valve and open the 

starboard tank valve. Now pump priming bulb 5 or 6 times. 

Now close Starboard tank valve and pump priming bulb 

until it becomes firm. Your fuel filter, generator fuel pump, 

outboard fuel pump and carburetors are now primed. Now 

remove auxiliary fuel tank hose from tank and adjust shut 

off valves to suit your needs.

fUEL SYSTEM

Summary of Contents for ELECTROFISHING BOATS






















































Reviews:

No comments