Smith-Root ELECTROFISHING BOATS, User Manual, Page: 11 / 53

fOOT SWITCH OPERATION
9
smith-root.com
USER'S MANUAL
Note:The Both/Separate switch only affects the work deck foot switches and has
no effect on the Auxiliary or Command Center foot switches.
1. Auxiliary foot switch inactive/command center foot switch inactive
- (not required, no foot switch plug needed to operate normally).
Note: one or both work deck switches must be operated.
2. Operation of command center foot switch required. Operation of
auxiliary foot switches not required. Note: one or both work deck
switches must be operated. The Command Center (Pilot) foot
switch or Auxiliary foot switches will not activate the shocker
alone. One of the work deck foot switches must be pushed
(separate position).
3. When using an auxiliary
foot switch, the toggle
switch must be in the active
position. Electrofisher will
not operate without auxiliary
foot switches depressed.
Note: one or both work deck
switches must be operated.
The Patch Panel cables have been unplugged in the following pictures so the Auxiliary Foot
Switch & Control panel can be seen.
The Both and Separate foot switch position switch is located on the lower starboard side of the console.
The switch controls the function of the work deck foot switches. In the separate position, each foot
switch controls the output. In the Both position, the two foot switches must be pushed simultaneously
to activate output. The Command Center foot switch is located on the aft side of the console and is
operated by the helmsman.
Left to Right - Both and Separate work deck switch on console front; Command Center Foot Switch; Work
deck foot switches.
COMMAND CENTER & AUXILIARY fOOT SWITCH SETTINGS
WORK DECK fOOT SWITCH SETTINGS
Auxiliary Foot Switch