Smith-Root ELECTROFISHING BOATS, User Manual, Page: 13 / 53

11
smith-root.com
USER'S MANUAL
1. Check your batteries.
Note: If the batteries need to be charged, use built in
charger.
2. Turn the battery selector switch and boat ignition "On"
to test the electrical system.
Note: DO NOT run pumps without water. The
impellers will become damaged very quickly.
3. Check the generator oil level. See Electrofisher section;
Generator Owner's Manual for details.
4. Check the outboard oil. See Motor Section - Outboard
Owner's Manual for details.
5. Check the generator and outboard motor fuel supply.
6. Check the fire extinguishers. (The gauge should be in the
green).
7. Check the fish holding tank for stand-pipes and
cleanliness.
8. Check boat for required equipment:
Life jackets for all personnel on board, plus one extra •
Rubber coats, rubber boots, and rain gear •
Rubber gloves •
Dip nets •
Tools •
Spare bilge plug •
9. Be sure to store all personal gear before launching the
boat.
10. Locate the bilge plug and install before launching.
11. Give everything one final visual inspection before
launching.
PRE-LAUNCH CHECKLIST