24
9.3
Operating anomalies
Open door.
If the door is opened with the cycle in progress, “CLOSE”
flashes and the program stops. After closing the door, the
program start must be confirmed by pressing
and
holding it down for 1 second (light L2 changes from green to
blue).
Power blackout.
In the event of a power blackout while the cycle is running,
the program stops and restarts automatically from the
beginning when the power is restored.
9.4
Program change
With program started, press
and hold it down to
interrupt it.
Change the program by pressing
Confirm the program start by
pressing and hold it
down for 1 second (light L2 turns blue again).
N.B.:
During heating of the water in the boiler and tank with the cycle running, the tank heating element
and boiler heating element
symbols may appear on the display.
Tank heating does not start until heating of the boiler is completed.
Filter presence sensor (on some models only)
The filter is fitted with a sensor which checks that it is properly fitted; if it is not in the correct position, the
word “FiLTER” appears on the display.
