Cleaning and maintenance
62
4. Slide out and remove the lamp.
5. Replace the lamp with one of the same
type (40W).
6. Refit the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
Removing the seal of the oven
To permit thorough cleaning of the oven, the
door seal may be removed. There are
fasteners on all 4 sides and in the middle to
attach it to the edge of the oven. Pull the
seal outwards at the indicated points in
order to remove it from the appliance.
To keep the seals clean, use a non-abrasive
sponge and lukewarm water. Seals should
be soft and elastic.
Do not touch the halogen lamp
directly with your fingers, but wrap
it in insulating material.
