background image

 

 

Introduction

 

 

4

 

 

 

1

 

INSTRUCTIONS FOR SAFE AND PROPER USE 

 

   

 

  THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT 

IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE 
COOKER. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN 
BEFORE USING THE COOKER. ALSO KEEP THE SERIES OF NOZZLES SUPPLIED. 
INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH 
THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND 
CONFORMS TO CURRENT 

REGULATIONS IN FORCE

. THE APPLIANCE HAS BEEN BUILT TO 

CARRY OUT THE FOLLOWING FUNCTIONS: 

COOKING AND HEATING-UP OF FOOD

. ALL 

OTHER USES ARE CONSIDERED IMPROPER.  

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE. 

 

   

 

  DO NOT LEAVE THE PACKING IN THE HOME ENVIRONMENT.  SEPARATE THE VARIOUS 

WASTE MATERIALS  AND TAKE THEM TO THE NEAREST SPECIAL GARBAGE COLLECTION 
CENTRE. 

 

   

 

  IT IS OBLIGATORY FOR THE ELECTRICAL SYSTEM TO BE GROUNDED ACCORDING TO THE 

METHODS REQUIRED BY SAFETY RULES. 

 

   

 

 WHEN LINKING UP TO MAINS BY PLUG AND SOCKET, MAKE SURE THAT BOTH ARE 

COMPATIBLE AND CONNECT BY MEANS OF A POWER CABLE COMPLYING WITH 
APPLICABLE REGULATIONS. 
THE SOCKET MUST BE ACCESSIBLE AFTER THE APPLIANCE HAS BEEN BUILT IN. 

NEVER UNPLUG BY PULLING ON THE CABLE. 

 

   

 

 IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE 

APPLIANCE, FOLLOWING THE INSTRUCTIONS BELOW. SHOULD THE APPLIANCE NOT 
FUNCTION, DISCONNECT IT FROM THE SUPPLY AND CALL THE NEAREST TECHNICAL 
ASSISTANCE CENTRE. 

NEVER ATTEMPT TO REPAIR THE APPLIANCE. 

 

   

 

  WHEN NOT IN USE, MAKE SURE THAT THE CONTROL KNOBS ARE IN THE CORRECT (OFF) 

POSITION 

  . 

 

   

 

 NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY 

LIGHTED AND CAUSE FIRES. 

 

   

 

  THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS 

POSITIONED VISIBLY IN THE STORAGE COMPARTMENT. 

THE PLATE MUST NOT BE REMOVED. 

 

   

 

 

DO NOT PUT

 PANS WITHOUT PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE COOKING 

hob GRIDS. 

 

   

 

 

DO NOT USE

 CONTAINERS OR BROILERS THAT EXTEND BEYOND THE OUTER PERIMETER 

OF THE HOB. 

Summary of Contents for SCB80GX

























Reviews: