15
Instructions for the User
7.6.2
Show Room Function
With the oven in OFF status (see point “7.2 Operating modes”) keep PT1
pressed until the message OFF SHO appears on DSP1. This means that
the SHOW ROOM function (which disables all the heating elements so
that only the control panel works) is not active.
Turn PT1 to the right or left to activate (ON SHO) or deactivate (OFF SHO)
this function. To use the oven normally, set OFF SHO.
After setting the parameter required, press PT2 to return the oven to the
initial standby status.
7.6.3
Power selection function
With the oven in OFF status (see point “7.2 Operating modes”) keep PT1
pressed until the message OFF SHO appears on DSP1. Now press PT1
once again and the message “OFF 2300” will appear on DPS1.
Turn PT1 to the right or left to activate (ON 2300) or deactivate (OFF 2300)
this function, which limits the oven's maximum power absorption, in any
function, to 2300 W.
After setting the parameter required, press PT2 to return the oven to the
initial standby status.
