13
Instructions for the User
Once PT1 has been pressed, the oven will return to normal operation. PT2
has to be pressed to switch the oven off completely.
Modifying the data set
Once semiautomatic cooking has started, its duration can be changed.
When the
symbol is steady and cooking is in progress, press PT1
once. The
symbol starts flashing and PT1 can be turned to change the
set duration. A few seconds after the last change, the
symbol will stop
flashing, and semiautomatic cooking will restart from the new value.
To change the preset temperature, wait for the
symbol to become
steady and turn PT1 to the right or left to increase or decrease the cooking
temperature.
7.5.3
Automatic cooking
Automatic cooking is the function which allows a cooking operation to be
started at a set time and then ended after a specific length of time set by
the user.
Select a cooking function, set the cooking temperature required or leave
the preset temperature (see point “7.4 Selecting the function”) and press
PT1 twice. The display will show the
figures and the
symbol
(flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to
23:59).
For reasons of safety, when setting automatic cooking the user must first
program a cooking duration and then set the cooking start time. It is not
possible to set the cooking start time only, without setting the cooking
duration.
After setting the duration, press PT1 once.
The
symbol and the current time will appear on the display.
Turning PT1 to the right increases the time, allowing the
cooking start
time required to be set
.
A few seconds after the required duration is set, the
and
symbols
will stop flashing, and the oven will start to wait for the starting time set. At
the end, the word STOP will appear on DSP1, cooking will stop and a
buzzer will sound; press PT1 to deactivate it.
Once PT1 has been pressed, the oven will return to normal operation. PT2
has to be pressed to switch the oven off completely.
