Manuale GW3060 - User
Versione 22.10.08
22
5.8
HOW TO REGULATE THE WASHING PRESSURE IN THE SPRAYING ARMS
The pressure of the washing water in the top and bottom spraying arms can be regulated by means of the
adjuster under the spraying arm itself. Turn the adjuster lever fully towards the left (normal position) to obtain
the maximum pressure in the top spraying arm or in the injection system.
Turn the lever towards the right (towards the bottom of the tub) to obtain the maximum pressure in the bottom
spraying arm as the top one will be throttled.
Pressure regulator
1
Maximum flow at top level
2 Balanced
flow
3
Maximum flow from bottom arm
5.9
HOW TO FILL THE WASHING TROLLEYS
The machine is supplied without trolleys. The Customer chooses the trolleys he needs from a vast range of
available solutions.
These trolleys are simply placed on the door and allowed to slide inside. Connection to the hydraulic circuit is
automatic. It may be necessary to initially adjust the upper funnel at the water inlet.
A loaded trolley can weigh as much as 20 kg: take care when handling it. Persons with problems
affecting their backs or articulations should not load or unload the trolleys.
Smeg declines all liability for problems concerning the health of persons caused by
lengthy use of the machine.
Take great care when positioning the instruments in the baskets/trolleys: a good position,
where all the surfaces are exposed to the washing action certainly contributes towards the result
of the washing and disinfecting cycle.