11
6.1.7 tStP (minimum rinsing temperature) function
Modify the parameter (ON/OFF) by pressing .
Set at “on” for minimum rinsing temperature as set.
Set as “off” to accept minimum rinsing temperature a few degrees lower than the setting if hot intake water is not
used.
6.1.8 Rinse aid pump
To reset, press
for 3 seconds.
Display (also reset when needed)
6.1.9 Detergent pump
To reset, press
for 3 seconds.
Display (also reset when needed)
6.1.10 Energy consumption – Display and reset
To reset, press
for 3 seconds.
6.1.11 Customisation of duration of program P4
The duration of program
P4
can be customised from
5 to 20 minutes
using the appliance parameter modification
procedure,
but the dishwasher must be set on program
P4.
After setting program
P4
access the programming
procedure and scroll through to “
ınF
” (last parameter to
appear) then press the button to modify the duration
of the cycle (from 5 to 20 minutes)
After a few seconds without the user pressing any
buttons, the display will return to the normal operating
status and the modifications will be saved.
Summary of Contents for CW500
Page 1: ...PROFESSIONAL DISHWASHER ...
