12
6.1.12 Setting the Model (for After-Sales Service only)
Modify by pressing .
6.2 Starting the peristaltic pumps – rapid filling of detergent and rinse aid delivery
circuit.
Perform after the parameter modification procedure explained in the previous point.
Indicator lights as follows: off; green; orange;
flashing.
With the dishwasher powered up, access “programming mode” by pressing the
on/off button for a few seconds; at the “beep”, release the button and press it
again
quickly within 0.5 seconds
.
The peristaltic pumps continue to operate until the same buttons are pressed
again. The rinse aid and detergent symbol lights remain on as long as work is
in progress; bear in mind that the rinse aid peristaltic pump fills the circuit in
about 7 minutes, while for the detergent it only takes 2 minutes.
Summary of Contents for CW500
Page 1: ...PROFESSIONAL DISHWASHER ...
