Instructions for the user
64
10.2.2
Burner caps, flame spreader crowns and burners
For easier cleaning, the flame-spreader crowns can be removed. wash
them with warm water and a non-abrasive detergent making sure to
remove any encrustation, then wait until they are
perfectly dry
. Replace
the flame spreader crowns, making sure that they are correctly in place
with their respective burner caps and ensuring that the holes
A
in the
flame-spreaders are aligned with the igniters and thermocouples.
10.2.3
Igniters and thermocouples
For correct operation the igniters and thermocouples must
always be perfectly clean. Check them frequently and clean
them with a damp cloth if necessary. Remove any dry
residues with a wooden toothpick or a needle.