Revision n.1
User Manual B-One
Edition: 04/2009
Page 36 of 52
6.7
DISPLAY
The contrast and brightness of the display can be adjusted. The temperature which the
display is subject to can also be displayed to improve adjustment.
6.8
SD MEMORY
B-One is equipped with an "SD" memory card data archive system.
Select this setting to manually save cycles memorised in the archive on the SD support, or
to format the SD card (recommended upon first use on the B-One with a new memory
card ).
Data is automatically archived in folders in the memory.
Protocol for naming folders and files in the archive is as follows:
•
Machine registration number (name of "father" folder-directory)
o
Cycle operating data (name of "child" folder-directory)
Progressive cycle number (file name with information related to cycle)
6.9
PRODUCT INFO
Read-only display of product information:
1.
model name
2.
machine serial number
3.
software version
6.10
MAINTENANCE
Read-only display of last commands for basic user operations, ex.:
i.
Lining: Weekly cleaning with a clean - wet cloth
ii.
Sterilization chamber: Cleaning with a clean cloth and hot water every 30
cycles (approximately every 3 weeks)
iii.
Water: specifications of recommended water (conductivity threshold 15µS)
iv.
Exterior machine cleaning. Disconnect the power supply cable from the
autoclave. Clean the machine exterior with a clean cloth moistened with hot
water.
In this section, the user can enter into the SPECIAL PROCEDURES by entering a
password for configuration parameters display or to start up system resetting procedures.
6.11
SERVICE
Password entry is requested to access serial number and configuration parameters
modification.
