Instructions
8
• If this cooking range is to be
connected to a new or upgraded
electrical installation, then it must
be connected by a supply cord
fitted with:
1 An appropriate rated plug that is
compatible the socket-outlet fitted
to the final sub-circuit in the fixed
wiring that supplies this cooker.
2 An appropriate rated installation
male connector that is compatible
with the installation female con-
nector fitted to the final sub-circuit
in the fixed wiring that supplies the
cooker.
• If required, use a pressure
regulator that complies with
current regulations.
• After carrying out any operation,
check that the tightening torque of
gas connections is between 10 Nm
and 15 Nm.
• At the end of the installation, check
for any leaks with a soapy
solution, never with a flame.
• Have the electrical connection
performed by authorised
technical personnel.
• If the range is not fitted with a
flexible cord, the instruction
manual must clearly state the type
and size of cord to be used.
• The instruction manual must
include details indicating the
correct installation and use of the
baking tray and shelves.
• The appliance must be connected
to earth in compliance with
electrical system safety standards.
• Use cables withstanding a
temperature of at least 90°C.
• The tightening torque of the screws
of the terminal supply wires must
be 1.5 - 2 Nm.
• Before installation, make sure that
the local gas supply (gas type
and pressure) and the settings of
the domestic appliance are
compatible.
• The settings for this domestic
appliance are shown on the gas
setting label.
• This domestic appliance is not
connected to a device for
extracting combustion products. It
must be installed and connected
in accordance with current
installation regulations. Pay
particular attention to the relevant
requirements regarding
ventilation.
