Cleaning and maintenance
33
EN
1. Remove the bulb protector (
A
) by
turning it anticlockwise.
2. Replace the bulb with one of the same
type (
B
).
3. Re-fit the protective cover.
Proceed in the same way to replace the
bulb for the auxiliary oven.
Installing and removing the seal
To remove the seal:
To permit thorough cleaning of the auxiliary
oven, the door seal can be removed. There
are fasteners on all 4 sides and in the
middle to attach it to the edge of the oven.
• Pull all points of the seal outwards to
detach the fasteners.
To keep the seals clean, use a non-abrasive
sponge and lukewarm water. Seals should
be soft and elastic.
To refit the seal:
• Hook the clips located in the 4 corners
and in the centre onto the seal.
