BACnet Router Start-up Guide
Page 14 of 27
4.3
10/100 Ethernet Connection Port
The Ethernet Port is used both for BACnet Ethernet and BACnet/IP communications. It is also used for
configuring the router from a Web page.
Connect the router to a BACnet network and optionally to a PC for configuration purposes via an Ethernet
cable between the PC and the BACnet Router or connect the BACnet Router and the PC to the switch
using a straight CAT5 cable.
5
OPERATION
5.1
Power Up the Device
Apply power to the device. Ensure that the power supply used complies with the specifications provided
in
Appendix B
. Ensure that the cab
le is grounded using the “Frame GND” terminal. The BACnet Router
is factory set for 9-30VDC or 12-24VAC.
Ethernet
Port
Figure 11: Power Connection
PWR+
PWR-
FG
Figure 10: Ethernet Connection
