BACnet Router Start-up Guide
Page 13 of 27
4
INSTALLING THE BACNET ROUTER
NOTE: Only the 2 port FS-ROUTER-BAC model BACnet Router utilizes the R1 port.
4.1
RS-485 Connection R1 Port
Connect to the 3-pin connector as shown.
The following Baud Rates are supported on the R1 Port:
9600, 19200, 38400, 57600, 76800, 115200
4.2
RS-485 Connection R2 Port
Connect to the 3 pins on the left-hand-side of the 6 pin connector as shown.
The following Baud Rates are supported on the R2 Port:
9600, 19200, 38400, 57600, 76800, 115200
Figure 8: Port 1 RS-485 Connection
Figure 9: Port 2 RS-485 Connection
+
-
GND
B+
A-
SG
