BACnet Router Start-up Guide
Page 17 of 27
7
CONFIGURING THE BACNET ROUTER
7.1
Settings
7.1.1 Button Functions
•
Save
– write the currently displayed settings to the device. A
restart will be required to apply the updated settings.
•
Reload
– discard the currently displayed settings and reload
the settings stored on the device. This will undo any unsaved
edits.
•
Defaults
– discard the currently displayed settings and load
default settings. This must still be saved and the device must
be restarted for the default settings to be applied.
•
Restart
– restarts the device.
7.1.2 Network Settings
The IP settings for the router are also used by both BACnet/IP
connections. The IP settings can be changed in the Network
Settings section as shown.
7.1.3 Multiple Connections
•
Network Number
– set up the BACnet network number for the connection. Legal values are
1-65534. Each network number must be unique across the entire BACnet internetwork.
•
Enable
– enable or disable the connection; note that BACnet/IP Primary is always enabled.
7.1.4 BACnet/IP Primary
•
Device Instance
and
Device Name
– a BACnet Router must
provide a Device Object. Configure its name and Instance
Number here. Take care to select a Device Instance Number that
is unique across the entire BACnet internetwork.
•
IP Port
– the BACnet/IP default is 47808 (0xBAC0), but a different
port number may be specified here.
