BACnet IoT Gateway Start-up Guide
Page 48 of 60
APPENDIX A
SPECIFICATIONS
FS-IOT-BACW & FS-IOT-BACC
1
Available Ports
One RS-485 +/- ground port
One power +/- frame ground port
One Ethernet 10/100 BaseT port
Power Requirements
Input Voltage:
12-24V DC
BACW
Current draw:
@ 12V, 240 mA
Power Rating:
2.5 Watts
BACC
Current draw:
@ 12V, 670 mA
Approvals
CE and FCC Class B & C Part 15, TUV approved to UL 60950, IC Canada, RoHS
Compliant, PTCRB and CTIA
Dimensions (WxDxH)
4 x 1.1 x 2.7 in (10.16 x 2.8 x 6.8 cm)
Weight
0.4 lbs (0.2 Kg)
Operating Temperature
-20 to 70
o
C (-4 to 158
o
F)
Humidity
10-95% RH non-condensing
Wi-Fi 802.11 b/g/n
Frequency:
2.4 GHz
Channels:
1 to 11 (inclusive)
Antenna Type:
SMA
Encryption:
TKIP, WPA & AES
Cellular
2
Features:
3G & GPS
Antenna Type:
SMA
HSDPA:
Up to 21.0 Mbps
HSUPA:
Up to 5.76 Mbps
IMEI:
357178070517852
Figure 61: Specifications
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference
•
This device must accept any interference received, including interference that may cause undesired
operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his expense
Modifications not expressly approved by FieldServer could void the user's authority to operate the
equipment under FCC rules”.
1
Specifications subject to change without notice.
2
Only for FS-IOT-BACC.
