Quick Start Guide
– 5 –
6. Connect to the
Console Port
To make initial configuration changes to the AP, connect a PC to the AP’s console
port using the included console cable.
From a PC running VT-100 terminal emulator software, use the following settings:
◆
Baud rate — 115,200 bps
◆
Character Size — 8 Characters
◆
Parity — None
◆
Stop bit — One
◆
Data bits — 8
◆
Flow control — none
Log in to the command-line interface (CLI) using default settings:
◆
Login Name — admin
◆
Password —
null
(there is no default password)
For information on manually configuring an IP address for the AP, refer to the
Installation Guide
, which is on the Documentation CD included with the AP.
For further information on AP configuration and CLI commands, refer to the
Management Guide
, which is on the Documentation CD included with the AP.
Console Port
1
1