SMC Networks TigerVoIP SMCWSP-100 User Manual Download | Manualshive

Page: 16 / 76

background image

Installing the Battery

2-2

Charging the Battery

1.

Connect the AC Power Charger

— Lift up the rubber cover on the mini USB

charger port and connect the power charger to the port. Then, plug the charger
into an AC electrical outlet.

Note:

The power charger automatically adjusts to any voltage between 100-240
volts at 50 or 60 Hz.

2.

Fully Charge Battery

— For the first time charge, allow eight hours to fully

charge the battery.

Note:

For the first time use, please wait until the phone is fully charged before powering
on. When the phone is fully charged, the

symbol

is

displayed.

3.

Disconnect the Power Charger

— When the battery is fully charged, remove

the power charger from the phone and push down the charger port’s rubber
cover.

After the battery has been fully charged first time, following charges require only
three hours. You do not have to power off the phone while charging, just connect the
charger as described above and wait until the LCD display indicates the battery is
fully charged.

Lift Cover

Connect
Charger

«
...
14
15
16
17
18
...
»

Summary of Contents for TigerVoIP SMCWSP-100













































































Reviews:

No comments

Related manuals for TigerVoIP SMCWSP-100

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 312

Brand: Panasonic Pages: 311

TracFone SGH-T155G Series

Brand: Samsung Pages: 56

TracFone SGH-T245G

Brand: Samsung Pages: 88

Trender SPH-M380

Brand: Samsung Pages: 192

Brand: WM Systems Pages: 102

Brand: Profoon Pages: 56

Brand: Pacific GSM Pages: 8

Brand: Sony Ericsson Pages: 75

Brand: iDROID Pages: 21

Brand: AMGOO Pages: 44

Brand: Dartel Pages: 43

Brand: Ericsson Pages: 63

Brand: TAG Heuer Pages: 62

Brand: Secur Pages: 2

Brand: Verizon Pages: 10

Brand: Quadro Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands