C
OMMAND
L
INE
I
NTERFACE
4-210
To configure private VLANs, follow these steps:
1.
Use the
private-vlan
command to designate one or more community
VLANs and the primary VLAN that will channel traffic outside the
community groups.
2.
Use the
private-vlan association
command to map the secondary
(i.e., community) VLAN(s) to the primary VLAN.
3.
Use the
switchport mode private-vlan
command to configure ports
as promiscuous (i.e., having access to all ports in the primary VLAN)
or host (i.e., having access restricted to community VLAN members,
and channeling all other traffic through a promiscuous port).
4.
Use the
switchport private-vlan host-association
command to
assign a port to a secondary VLAN.
5.
Use the
switchport private-vlan mapping
command to assign a
port to a primary VLAN.
6.
Use the
show vlan private-vlan
command to verify your
configuration settings.
private-vlan
Use this command to create a primary, isolated or community private
VLAN. Use the
no
form to remove the specified private VLAN.
Syntax
private-vlan
vlan-id
{
community
|
primary
|
isolated
}
no private-vlan
vlan-id
•
vlan-id
- ID of private VLAN. (Range: 1-4094, no leading zeroes).
•
community
- A VLAN in which traffic is restricted to port
members.
•
primary
- A VLAN which can contain one or more community
Display Private VLAN Information
show vlan private-vlan Shows private VLAN information
NE,
PE
4-217
Table 4-55 Private VLAN Commands
Command
Function
Mode Page
Summary of Contents for TigerSwitch
