SMC Networks TigerSwitch, Management Manual

Page: 339 / 518

A
UTHENTICATION
C
OMMANDS
4-97
access-request packet from the client to the server, while
encrypts the entire body of the packet.
• RADIUS and logon authentication assigns a specific
privilege level for each user name and password pair. The user name,
password, and privilege level must be configured on the authentication
server.
• You can specify three authentication methods in a single command to
indicate the authentication sequence. For example, if you enter
“
authentication login radius tacacs local ,” the user name and
password on the RADIUS server is verified first. If the RADIUS
server is not available, then authentication is attempted on the
server. If the server is not available, the local
user name and password is checked.
Example
Related Commands
username - for setting the local user names and passwords (4-36)
authentication enable
This command defines the authentication method and precedence to use
when changing from Exec command mode to Privileged Exec command
mode with the
enable command (see page 4-27). Use the no form to
restore the default.
Syntax
authentication enable {[ local ] [ radius ] [ tacacs ]}
no authentication enable
• local - Use local password only.
• radius - Use RADIUS server password only.
• tacacs - Use TACACS server password.
Default Setting
Local
Console(config)#authentication login radius
Console(config)#