SMC Networks TigerSwitch, Management Manual

Page: 265 / 518

L
INE
C
OMMANDS
4-23
parity
This command defines the generation of a parity bit. Use the no form to
restore the default setting.
Syntax
parity { none | even | odd }
no parity
- none - No parity
- even - Even parity
- odd - Odd parity
Default Setting
No parity
Command Mode
Line Configuration
Command Usage
Communication protocols provided by devices such as terminals and
modems often require a specific parity bit setting.
Example
To specify no parity, enter this command:
speed
This command sets the terminal line’s baud rate. This command sets both
the transmit (to terminal) and receive (from terminal) speeds. Use the
no
form to restore the default setting.
Syntax
speed bps
no speed
bps - Baud rate in bits per second.
(Options: 9600, 19200, 38400, 57600, 115200 bps)
Console(config-line)#parity none
Console(config-line)#