SMC Networks TigerSwitch, Management Manual

Page: 451 / 518

VLAN C
OMMANDS
4-209
Example
The following example shows how to display information for VLAN 1:
Configuring Private VLANs
Private VLANs provide port-based security and isolation between ports
within the assigned VLAN. This switch supports two types of private
VLAN ports: promiscuous, and community ports. A promiscuous port
can communicate with all interfaces within a private VLAN. Community
ports can only communicate with other ports in their own community
VLAN, and with their designated promiscuous ports. This section
describes commands used to configure private VLANs.
Console#show vlan id 1
Vlan ID: 1
Type: Static
Name: DefaultVlan
Status: Active
Ports/Port channel: Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)
Eth1/ 6(S) Eth1/ 7(S) Eth1/ 8(S) Eth1/ 9(S) Eth1/10(S)
Eth1/11(S) Eth1/12(S) Eth1/13(S) Eth1/14(S) Eth1/15(S)
Eth1/16(S) Eth1/17(S) Eth1/18(S) Eth1/19(S) Eth1/20(S)
Eth1/21(S) Eth1/22(S) Eth1/23(S) Eth1/24(S) Eth1/25(S)
Eth1/26(S)
Console#
Table 4-55 Private VLAN Commands
Command Function Mode Page
Edit Private VLAN Groups
private-vlan Adds or deletes primary and secondary
VLANs VC 4-210
private-vlan association Associates a secondary VLAN with a
primary VLAN
VC 4-211
Configure Private VLAN Interfaces
switchport mode
private-vlan Sets an interface to host mode or
promiscuous mode IC 4-213
switchport private-vlan
host-association Associates an interface with a secondary
VLAN IC 4-214
switchport private-vlan
mapping Maps an interface to a primary VLAN IC 4-214