3. Attaching and detaching lead wires with sockets
- Attaching
Insert the sockets into the square holes of the connector (with +,-
indication), and continue to push the sockets all the way in until
the lock by hooking into the seats in the connector. (When they
are pushed in, their hooks open and they are locked
automatically.) Next, confirm that they are locked by pulling lightly
on the lead wires.
- Detaching
To detach a socket from a connector, pull out the lead wire
while pressing the socket’s hook with a stick having a thin tip
(approx. 1 mm). If the socket is used again, spread the hook
outward.
Common Connector Assembly Wiring
When ordering common connector assemblies alone, wiring
should be performed as outlined in the drawing below. For details
on attachment of sockets, refer to the section “How to Use Plug
Connectors” on page 9.
Common Connector Assembly for Manifold
SX3000/5000/7000 Series
Specific Product Precautions 2
Be sure to read before handling.
Socket
Hook
Insert a socket into square hole
Connector
Lead wire
Socket
Insert the socket into the connector (below COM indicator)
of the neighboring solenoid valve.
Common wiring
Caution
- 10 -
SX3000-OMM0002-B
Summary of Contents for SX3000 Series
Page 13: ...12 SX3000 OMM0002 B...
Page 14: ...13 SX3000 OMM0002 B...
