![background image](http://html1.mh-extra.com/html/smc-networks/smcweb-n2/smcweb-n2_user-manual_1300585102.webp)
SMCWEB-N2 Wireless N Universal Repeater User Manual
- 102 -
8.8.4 SNTP
Choose
Management Function
>
SNTP
and the
SNTP
page is displayed.
SNTP refers to Simple Network Time Protocol. In this page, you can set time
information of your router. It is strongly recommended to set the correct time on the
router first. This ensures proper functioning of log, site blocking, and schedule
because their time settings are based on time information in this page.
Automatically synchronize with Internet time servers
: If selected
automatic synchronization with the network time server is enabled.
First NTP time server
: Enter the IP address of the primary NTP server. The
NTP server is a network time server that is used to synchronize the time of
computers on the Internet. When you set the first NTP time server, the router
obtains GMT time from the specified NTP server with priority after it is
connected to the Internet.
Second NTP time server
: Enter the IP address of the secondary NTP
server if available.
Current Router Time
: Display the current system time of the router.
Time Zone
: Select the time zone where you are located.
Enable Daylight Saving
: Enable or disable daylight saving time (DST).
Daylight Saving Offset
: Select a proper offset. If it is set to +1:00, 10:00 in
the morning in standard time becomes 11:00 in the morning in DST.
Daylight Saving Dates
: Set the starting time and ending time of DST.
After finishing settings, click
Apply
to save the settings.