![background image](http://html1.mh-extra.com/html/smc-networks/smcweb-n2/smcweb-n2_user-manual_1300585028.webp)
SMCWEB-N2 Wireless N Universal Repeater User Manual
- 28 -
6 Configuring SMCWEB-N2
Table 6.1 IP information of AP/Repeater/Client modes of
SMCWEB-N2
Mode On
the Case
Mode Available
In the Web
Management IP
Address
Subnet MAC
Address
DHCP
Way of
connecting to
PC
AP
Bridge (default)
192.168.2.1 255.255.255.0
Disable Ethernet
cable
/Wireless
Router Enable
Wireless
only
Repeater Wireless
Universal
Repeater
(default)
192.168.2.1 255.255.255.0
Disable Ethernet
cable
/Wireless
WDS
Client Client
(default)
192.168.2.1
255.255.255.0
Disable Ethernet
cable
only
Step 1
Set the three-way switch on the case of SMCWEB-N2 to the mode you
want.
Run the Internet Explorer (IE). Enter the management IP address of
192.168.2.1
and press
Enter
. In the login window that is displayed, enter
the user name
admin
and password
smcadmin
, and click
Login
.
Step 2
Configure parameters for the mode you selected. Terminal devices can
access the network through SMCWEB-N2 after you finish configuration
by following procedures in the sections below.