SMCWEB-N2 Wireless N Universal Repeater User Manual
- 96 -
Step 2
Click
Add
to specify a service for blocking. The
Block Services Setup
page is displayed:
Step 3
Set the parameters in this page.
Service Type
: Select a service type. If your desired type is not in the list,
select
User defined
. Then, you need to select the protocol, enter the service
name, and specify the port range. For services that exist in the drop-down list,
the corresponding information is already preset.
Protocol
: Set the protocol used at service ports. If you are not sure about the
protocol that the application uses, select
TCP/UDP
.
Starting Port/Ending Port
: The starting and ending ports of the port range
where the specified service is blocked. If the application uses a single port
number, enter the number in both fields.
Service Typ
e
/User Defined
: Enter the service name.
Filter Service For:
You can block the specified service for a single computer,
computers within an IP address range, or all computers.
After finishing settings, click
Add
to add a new rule. Then, click
Apply
to save the
settings.
