SMC Smoke Detector Guide
Copyright
©
2011 SMC Networks
Page 8
All Rights Reserved
continued on next page
I/M SMCSMXX-Z rev. 2.0
7/26/11
To attach the smoke detector to the mounting
base:
A.
Line up the raised alignment tab on the lip
of the smoke detector with the arrow on the
mounting base.
B.
Insert the smoke detector into the base and
turn clockwise approximately 15 degrees. It
snaps firmly into place when secure.
10
View Zone Event History
To view event history:
A.
Tap the Security widget on the Home
screen.
B.
Tap the History tab. The Zone Event History
shows the event history.
11
Disable Zones
The system can bypass a zone, so the zone is not
monitored when the system is armed. This is
useful when a sensor (such as your SMC Smoke
Detector) is being repaired. You can only change
the Bypass state of a zone when the system is
disarmed.
The system continues to log the activity of
bypassed zones in the Event History (see “View
Zone Event History,” above).
To bypass a zone:
A.
With the system disarmed, tap the Security
app on the Home screen.
B.
Tap the Turn Zone Off button for the smoke
detector. The Turn Zone Off button changes
to Turn Zone On.
C.
When the system is disarmed, the Security
Status header shows that some zones have
been bypassed.
12
Delete the Smoke Detector
Deleting a sensor (such as your SMC Smoke
Detector) from the premises removes it from
being monitored by the customer’s system.
This is not the same as disabling (bypassing) a
sensor. You should delete a sensor only:
¾
If the sensor is being removed from the
premises
¾
To reset the sensor to factory default
settings by deleting the sensor and re-adding
it immediately.
To delete a sensor from the system:
A.
Contact Customer Care to obtain the
Premise Passphrase for the current customer
account.
B.
Perform steps A through D in step 7, “Adding
to the TouchScreen.”
C.
When the Technician Settings menu appears,
select Sensors & Zones > Delete a
Sensor/Zone. The Premise Passphrase
keyboard appears.
Enter the Premise Passphrase an
D.
d click
Done. The currently installed
sensors/security zones appear.
Tap the zone you want to delete and fol
the instructions provided by the
E.
low
TouchScreen to delete the sensor and
security zone from the current system.
Congratulations! You have successfully
installed the SMC Smoke Detector.
